Layer Selection Bluetooth Support September 15, 2026 19:16 Updated Introduction In Layer Selection, you will indicate the Layers implemented in your Design. Warning: Any included Design must not implement any Layers using withdrawn specification(s). Layer Selection in Qualification Workspace Selecting the desired Core Configuration will preselect the minimum Layer requirements for the chosen Core Configuration. If needed, select additional Layers that are implemented in your Design. If the Design does not implement Core Layers, select No for the first question and select the supported X2Core Layers. The Layer Selection screen in Qualification Workspace.To include a Layer in your Design, select the desired Layer so the Layer's checkbox is selected, and the Layer is highlighted in blue. To un-select a Layer, select the Layer again to remove the checkbox selection and highlight. A selected Layer, highlighted and with its checkbox ticked.Once the Layer selection process is complete, select Save and go to ICS Selection. Still need help Submit a support request and include the Design Number (DN) of the Design you are qualifying. Submit a support request This KBA is intended to provide Bluetooth® SIG members with helpful information and address frequently asked questions. Governing documents, membership agreements, policies, and other Bluetooth SIG rules and guidelines can be found on the Bluetooth SIG governing documents page. Related articles ICS Selection and Consistency Check Understanding Core Configurations Product Details Test Plan and Documentation Frequently asked questions about Qualification Program Reference Document (QPRD) v3? (effective July 1, 2024)